• reliable alarm with voice calls with optional acknowledgement via telephone keyboard
  • automatic text into voice conversion
  • automatic diversion to alternate parties (alerting chain) in case of non-responding subscribers
  • enough memory for up to 5 minutes of speech blocks to be composed during voice alerts
  • fast and reliable transmission of SMS, fax, E-Mail or pager alerts for any incident to be signalled
  • transmission of Push messages to iOS and Android cell phones
  • transmission of Threema messages
  • MQTT client for communication with a MQTT broker (on devices with GSM and/or LAN)
  • 100 destination numbers, which optionally can be combined in up to 32 groups (group alerts)
  • „Follow me" function for changing on-call duties / standby sevices
  • easy understandable functional principle of event and reaction
  • to each event an arbitrary message text can be assigned
  • a message text can contain macros (placeholder for date/time, temperature and voltage values etc.)
  • 10 additonal text memories for repeated usage in messages (eg facility description)
  • all GSM devices support contract cards and prepaid cards
  • notification in the case of main power failure (SMS, E-Mail, fax, voice alert)
  • switching output relais by caller line identification, password protected SMS or DTMF tone sequences
  • remote parametrisation and routine messages
  • cost control and notification on limit expiration
  • comprehensive time controlled functions:
    - automatic Daylight Saving Time handling
    - 24x7 weekday / time table
    - table for fixed and floating holidays
    - table for sun rise / sun set times
  • 10 multifunction counter (frequency counter, pulse counter, operation time counter)
  • flexible sequence control with flags and macros
  • support of Modbus/RTU, Modbus/ASCII and Modbus/TCP (model depending)
    - Server mode, eg. for sending voice messages directly out of a PLC
    - Client mode for supervision of Modbus enabled devices and alerts on deviations from reference values
  • M-Bus support ("Meter Bus" according to EN13757) M-Bus zum Anschluss von Energiezählern (Strom, Wasser, Gas, Wärme)
    - internal M-Bus interface or connection to an external M-Bus level converter (device dependent)
    - M-Bus gateway for remote meter reading of energy counter (electricity, water, gas, heat)
    - M-Bus master functionality (IT180/IT181) for up to 20 slaves
    - publishing of changed M-Bus counter values per MQTT to a MQTT broker (M-Bus / MQTT converter)
  • connection of meter with S0 pulse interface
  • fast placing into operation without programming knowledge
  • programming software in two versions included in deliyery:
    - QuickSetup for a rapid first-time operation,
    - CONNY for extended programming issues
  • optional: connectivity to industrial automation systems via OPC server
  • optional: connectivity to emergency centrals with VdS2465 protocol
  • Made in Germany - developed and produced in Germany

Read more ...

  IT190 IT191 IT70 IT251GI IT251I IT35G IT35I
  IT100 IT191 IT70
IT251GI

IT251I
IT35G IT35I
Power supply:              
Operating voltage 230 V AC 230 V AC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC
Max. current consumption 50 mA 50 mA 200 mA 350 mA 350 mA 80 mA 80 mA
Rechargable battery
(not included in delivery)
intern intern extern extern extern - -
Charging circuit yes yes yes yes yes - -
Inputs:              
Digital switching inputs 6 6 4 20 20 2 2
Voltage inputs 0..10 V max.2 max.2 max. 4 - - - -
Current inputs 0..20 mA max.2 max. 2 max. 4 - - - -
Temperature inputs 1 1 2 3 3 - -
230V inputs - 1 - - - - -
Outputs:              
Relais outputs 48 V 1 1 2 6 6 1 1
Relais outputs 230 V - 1 - - - - -
Interfaces:              
USB yes yes yes yes yes - -
RS232 optional optional optional yes yes yes yes
Communication networks:              
GSM yes yes yes yes - yes yes
Assembly option LTE (4G) yes yes yes yes - in preparation -
ISDN / router with S0 interface - - - yes yes - -
MQTT client yes yes yes yes - yes -
               
Protection class IP65 IP65 IP20 IP20 IP20 IP20 IP20
Environmental temperature -40..+70° C -40..+70° C -20..+70° C -20..+70° C -20..+70° C -20..+70° C -20..+70° C
Humidity 0..100 % 0..100 % 0..70 % 0..70 % 0..70 % 0..70 % 0..70 %
Dimensions (L x W x H in mm) 150 x 180 x 35 150 x 180 x 35 86 x 70 x 58 86 x 155 x 58 86 x 155 x 58 94 x 35 x 76 94 x 35 x 76

 

Fault reporting device IT190 with 230V supply, IP65 housing, 6 dig., 2 analog and 1 temp input, 1 ou

  Part no.:  420249

  • IP65 housing 180 mm (L) x 130 mm (W) x 35 mm (H)
  • three M12 and two M16 cable fittings
  • 6 digital inputs
  • 2 analog inputs, 11 bit, +/- 0,25 %, per software switchable between 0..10 V and 0..20 mA
    (also usable as digital inputs and for the connection of water sensors)
  • 1 temperature sensor input (max. 100 m cable length)
  • 1 relais output 48 V / 1 A with changeover contact
  • operation voltage  230 V AC, 11.5 VA
  • integrated battery charging circuit, 9 V block battery (optional accessory)
  • supervision of the power supply
  • status indication with 13 multi color LEDs
  • real time clock with automatic Daylight Savice Time handling
  • communicaiton network: GSM (quadband 850/900/1800/1900 MHz), assembly option "LTE"
  • MQTT client
  • scaled analog measurement reading for usage in alert messages
  • also available as OPC field device and as alerting device with VdS2465 protocol

More...

GSM fault reporting device IT191 with protection class IP65 and additional 230V input and output

  Part no.:  420250

  • as IT190, but additional:
  • one relais output 230 V
    - switching power max. 2000 VA AC / 150 W DC
    - switching current max. 8 A 250 V AC, 5 A 30 V DC
    - switching voltage max. 250 V AC / 100 V DC
  • one 230 V switching input (coupling relais)
  • status indication with 15 multi color LEDs
  • also available as OPC field device and as alerting device with VdS2465 protocol

More...

Error reporting device IT70 for DIN rail mounting with 4 digital inputs, 4 analog inputs and 2 relais outputs

  Part no.:  420194

  • DIN rail mounted device 86 mm (L) x 70 mm (W) x 58 mm (H)
  • 4 digital inputs
  • 4 analog inputs, 10 Bit, +/- 5 %, software switchable between 0..10 V and 0..20 mA
    (also usable as digital inputs and for the connection of water sensors)
  • 2 temperature sensor inputs (max. 100 m cable length)
  • 2 relais outputs with changeover contacts
  • power supply 12..24 V DC
  • current cunsumption: approx. 80 mA
  • integrated battery recharging unit
  • supervision of power supplies
  • status indication with 19 multi-colored LEDs
  • real time clock with automatic daylight saving time switching
  • communication network: GSM (Quadband 850/900/1800/1900 MHz)
  • MQTT client
  • scaled analog measurement reading for usage in alert messages
  • also available as OPC field device and as alerting device with VdS2465 protocol

More...

ISDN error reporting device for DIN rails with 20 digital switching inputs and 6 relais outputs

  Part no.:  420196

  • DIN rail housing 86 mm (L) x 156 mm (W) x 58 mm (H)
  • 20 digital inputs
  • 3 temperature sensor inputs (max. 100 m cable length)
  • 6 relais output (3 with changeover contacts)
  • power supply 12..24 V DC
  • current consumption: max. 0,18 A / 0,28 A with battery charging
  • integrated battery charging circuit
  • supervision of main power supply
  • Real time clock with automatic Daylight Saving Time handling
  • communication network: ISDN or router with S0 interface
  • voice alerts
  • Blockade break
  • also available as OPC field device and as alerting device with VdS2465 protocol

More...

ISDN alarm modem for DIN rail mounting with 2 inputs and 1 output

  Part no.:  420217

  • DIN rail housing 94 mm (L) x 35 mm (W) x 76 mm (H)
  • 2 switching inputs
  • 1 relais output
  • power supply 12..24 V DC
  • current consumption: max.80 mA
  • real time clock with automatic Daylight Saving Time handling
  • communication network: ISDN or router with S0 interface
  • voice alerts
  • also available as OPC field device and as alerting device with VdS2465 protocol

More...

GSM alarm modem for DIN rail mounting with 2 inputs and 1 output

  Part no.:  420218

  • DIN rail housing 94 mm (L) x 35 mm (W) x 76 mm (H)
  • 2 switching inputs
  • 1 relais output
  • power supply: 12..24 V DC
  • current consumption: max.80 mA
  • real time clock with automatic Daylight Saving Time handling
  • communication network: GSM (Quadband 850/900/1800/1900 MHz)
  • MQTT client
  • also available as OPC field device and as alerting device with VdS2465 protocol

More...