DIN rail power supply 24 V, 0.63 A

  Part no.:  460515

  • for devices of the IT151 / IT251 / IT70 families
  • 230 V AC / 24 V DC, 0.63 A
  • dimensions: 51 mm (L) x 25 mm (W) x 93 mm (H)
Lead accumulator 12 V, 7.2 Ah

  Part no.:  460214

  • for devices of the IT151 / IT251 / IT70 families
  • 12 V, 7.2 Ah
  • VdS approved
  • dimensions: 152 mm (L) x 66 mm (W) x 95 mm (H)
  • connectors: Faston 4.8 mm
  • weight: 2.6 kg
Lead accumulator 12 V, 1.3 Ah

  Part no.:  460240

  • for devices of the IT151 / IT251 / IT70 families
  • 12 V, 1.3 Ah
  • VdS approved
  • dimensions: 97 mm (L) x 48 mm (W) x 50 mm (H)
  • connectors: Faston 4.8 mm
  • weight: 0.53 kg
Lead accumulator 12 V, 1.3 Ah for DIN rail mounting

  Part no.:  460516

  • for devices of the IT151 / IT251 / IT70 families
  • for DIN rail mounting
  • 12 V, 1.3 Ah
  • VdS approved
  • dimensions: 97 mm (L) x 48 mm (W) x 50 mm (H)
  • connectors: Faston 4.8 mm
  • weight: 0.54 kg
9 V block accumulator for IT180 / IT181

  Part no.:  460243

  • for devices of the IT180 / IT181 families
  • Ni-MH
  • 9 V, 200 mAh
GSM magnet antenna with SMA plug

  Part no.:  460139

  • Magnet antenna for devices of the IT151 / IT251 / IT70 / IT180 / IT181 families
  • Quad band GSM 824-960 / 1770-1880 MHz
  • 2 dBi gain
  • height ca. 10 cm
  • cable: RG174, length 2.5 m
  • SMA plug
GSM anntenna extension cable with SMA plug and SMA jack

  Part no.:  460141

  • Antenna extension cable for devices of the IT151 / IT251 / IT70 / IT180 / IT181 families
  • cable type: RG174
  • length: 5 m
  • SMA plug and SMA jack
  • special lengths on request
Embedded GSM antenna ("Puck antenna") with SMA plug

  Part no.:  460106

  • Omnidirectional antenna for devices of the IT151 / IT251 / IT70 / IT180 / IT181 families
  • mounting on vending machines, control cabinets, containern etc.
  • Dual band GSM 900 / 1800 MHz
  • 2,5 dBi gain
  • diameter: 75 mm
  • heigth: 21 mm
  • mounting hole diameter: 16 mm
  • cable: RG174, 2.5 m
  • SMA plug
Digital temperature sensor

  Part no.:  469216

  • for devices of the IT151 / IT251 / IT70 / IT180 / IT181 families
  • sensor type DS18S20
  • measurement range: -20 °C to +85 °C
  • resolution: 0.5° C
  • cable length 2 m (prolongable up to 100 m)
  • cable heads with end sleeves
Water sensor

  Part no.:  460242

  • for devices of the IT70 / IT180 / IT181 families
  • cable length: 6 m
  • cable heads with end sleeves
PIR motion detector with different construction types and in two colors

  Part no.:  460520 / 460521

  • for devices of the IT151 / IT251 / IT70 / IT180 / IT181 / IT35 families
  • all contacts reverse polarity protected
  • operation voltage 8 - 24 V DC / 6 mA
  • switching output: PhotoMOS relay 24 V / 100 mA

Construction types and colors:

  • printed circuit board with screw-type terminals:
    - horizontal, black sensor (39 x 11.5 x 12 mm, part no. 460520-HB)
    - vertical, black sensor (26,7 x 11.5 x 17 mm, part no. 460520-VB)
    - horizontal, white sensor (39 x 11.5 x 12 mm, part no. 460520-HW)
    - vertical, white sensor (26.7 x 11.5 x 17 mm, part no. 460520-VW)
  • PIR sensor in housing (29 x 25 x 18 mm) with screw lashes:
    - black sensor and housing, 2 m cable (part no. 460521-B)
    - white sensor and housing, 2 m cable (part no. 460521-W)
Adapter to extend a RS232 interface over LAN or internet

  Part no.:  460518

  • Adapter to extend a RS232 interface over LAN or internet
  • for remote control of IT151 / IT251 devices over LAN / Internet (IT70 / IT180 / IT181 only with RS232 option)
  • on the remote side a virtual COM port is installed
  • the adapter can be used together with CONNY and QuickSetup for the configuration of distant devices
  • Ethernet: 10/100 Mbit/s
  • for DIN rail mounting
  • dimensions: 85 mm (L) x 53 mm (W) x 31 mm (H)
  • driver for Windows ™ 2000 / XP / Server 2003 / Vista / Server 2008 / 7 (64 bit)
  • wall power supply (230 V AC)
Display unit for device families IT151 and IT251

  Part no.:  420187

  • display unit for devices of the IT151 / IT251 families
  • DIN rail housing 86 mm (L) x 35 mm (W) x 58 mm (H)
  • 26 LEDs showing the input and output states of the IT151 /  IT251
  • control and power supply via the IT151 / IT251 extension bus
Option "External antenna" for IT180 and IT181

  Part no.:  480001

  • Extension cable SMA right-angle-plug to SMA flange with O-ring
  • incl. external magnet antenna (see part no. 460139)
  • can be suplied ex works, on subsequent order a 6.5 mm drilling must be supplied on-site.

 

Option "Embedded antenna" for IT180 and IT181

  Part no.:  480005

  • Extension cable SMA right-angle-plug to SMA flange with O-ring
  • incl. external "Puck antenna" (see part no. 460141)
  • can be supplied ex works; on subsequent order a 6.5 mm drilling must be supplied on-site.

 

Option "RS232 interface for IT180 and IT181

  Part no.:  480002

  • RS232 signals made available on screw-type-connectors, eg. for connecting serial bus convertors
  • USB interface is still available as a programming interface
  • can be supplied ex works only

 

Option "RS232 interface" for IT70

  Part no.:  480003

  • Delivery of the IT70 with additional RS232 interface on the "Ext. Bus" jack
  • The cable RJ11 plug / D-Sub9 jack is included in delivery.
  • Wire allocation: RXD, TXD, GND
  • The USB interface can still be used for programming.
  • This option can be supplied ex works only.

 

Option "Audio output" for IT251

  Part no.:  480004

  • Audio output on screw-type terminals 22 and 23
  • Audio signal: galvanically isolated (audio transformer) -10 dB on 600 Ω
  • for connection to loudspeaker systems (ELA), paging amplifiers etc.
  • usage with the "SendAudio" action (similar to voice alerting)
  • This option can be supplied ex works only.